1. Home
  2. Product Information
  3. Products That SPIN
  4. Wheels
The unique design of our Wheel comes complete with these options . . .

PLEASE NOTE:

PVC pipe on all mounting options point toward the top of the cage.

The wheel MUST sit on TOP of the PVC pipe (all stands).  If it's a side mount, there is a small piece of pipe glued into the fitting, a floor stand has the upright pole.  If these are not mounted properly, your wheel WILL FALL OFF.

SIZES:

  • Large Cage Wheel and TITAN is greatly recommended for use in your permanent cage to allow greater jumping space.
  • It is  12” wide and 9-1/2” deep (front cover to the very back of the assembly)
  • Mounted on a floor stand:  The wheel is approximately 7” off floor of the cage and is a total of approximately 17” tall (cage floor to top of wheel).
  • Small Travel Wheel is great for travel, used in hospital cages or when you just can’t get a large wheel through the doors.
    • It is 9-1/2” wide and 6-3/4” deep (front cover to the very back of the assembly).
    • Mounted on a floor stand:  The wheel is approximately 7” off the floor of the cage and is a total of approximately 14” tall (cage floor to top of wheel).

BEARING ASSEMBLY SYSTEMS:

  • Removable Bearing System. This system allows you to detach the wheel for cleaning without getting the bearings wet.
  • Permanent Bearing System. This system is not removable from the wheel.  Do not submerge assembly in water as it will cause the bearings to rust.

TRACK STYLES:

  • Mesh Track:  allows all waste, urine and food to fall through to the bottom of the cage instead of on your pet.
  • Solid Track:  Solid plastic track available in SEVEN colors.  Will require daily cleaning.

Can be used for:  Hamsters (Syrian/Large), Hedgehogs, Mice, Prairie Dogs, Rats (Lady/Male) and Squirrels.  They are Sugar Glider safe, but we recommend using the Mesh Track.

Solid Track Sizes: 

  • Large 12” Wheel comes with a 4” track  -cut at 5"
  • Medium 9-1/2” Wheel comes with a 3” track - cut at 4"
  • Small 7-1/2” Wheel comes with a 2-1/4 – 3” track

STANDS:

Standard Floor Stand is Triangular in shape and raised 

Floor:  Flat Rectangle – Lays flat on the floor of cage

Open Rectangle – Lays flat on the floor of cage with opening in front. 

Wire Cage Side Mounts:

  • Horizontal Side Mount - Mounts sideways on the cage and fits directly behind the wheel.  Not visible when looking at the wheel
  • Vertical Side Mount – Mounts Up/Down on the cage directly behind the wheel.  You will be able to see this when looking at the wheel.
  • We have no idea what type of cage you own and cannot guarantee it can/will withstand, nor uphold the weight and/or vibration of the wheel.  It is possible that side mounted wheels will break the welds on some of the smaller wired cages.

PVC PIPE ON STANDS POINTS TOWARD THE TOP OF THE CAGE

 

The wheel MUST sit on TOP of the PVC pipe (all stands).  If it's a side mount, there is a small piece of pipe glued into the fitting, a floor stand has the upright pole.  If these are not mounted properly, your wheel WILL FALL OFF.